15.00-16.00

Opening session                                                                                                                                           Anne Blayo, Raša Urbas

15.00-15.15

Opening of the conference
Anne Blayo, president of iarigai; Raša Urbas, conference director

15.15-15.20

Introduction of new members

15.20-15.50

Invited opening presentation
Recognition of pigments in organic matrices.
M. Mozetič

15.50-16.00

Journal of Print and Media Research and its issue No. 3
Nils Enlund, Editor-in-Chief and Tim Claypole, guest editor

16.00-16.20

Coffee break - sponsored by Aero, d.o.

 16.20-16.30

 Meet the conference partners - a special presentation by Aero

16.30-17.45

Anne BlayoPlenary session 1 - Special printing

16.30-16.55

Braille printing with inkjet.
M. Schär

16.55-17.20

Understanding graphic protection methods in print production.
B. Morić-Kolarić, I. Budimir, J. Žiljak-Vujić

17.20-17.45

Reproduction of art paintings with their status in the near infrared spectrum.
J. Žiljak-Vujić, I. Žiljak-Stanimirović

 (to be followed by the city tour (18:00) and welcome cocktail – participants and partners)

 09.00-09.25

Keynote presentation
Materials science meets graphic communication for a joint venture beyond the conventional.
M. Klanjšek Gunde.

09.25-10.40

Plenary session 2 - Flexography 1                                                                                                                                 Tim Claypole

09.25-09.50

Surface patterning of flexo plates for improved ink transfer.
A. Hamblyn, D. Deganello, T. Claypole

09.50-10.15

Effects of solvent exposure on flexographic printing plates.
A. Theopold, J. Neumann, D. Maßfelder, E. Dörsam

10.15-10.40

Printing ink modified with hyperbranched polymer: rheological behaviour and print quality.
Z. Żołek-Tryznowska, J. Izdebska

10.40-10.50

Meet the conference partners - a special presentation by Artiko

10.50-11.10

Coffee break

11.10-12.50

Session 3 A - Flexography 2                                  Björn Kruse  

Session 3 B - Online and mobile media                    Nils Enlund

11.10-11.35

Ink splitting and the influence of structured surfaces
during the flexo printing.
S. Griesheimer, E. Dörsam

Augmented Reality as a technology bringing interactivity to print products.
A. Seisto, T. Kuula, T. Harviainen, M. Aikala

11.35-12.00

Effect of flexographic press parameters on the reproduction
of colour images.
T. Claypole, D. Bould,E. Jewell

Visualizing a content scenario for mobile devices towards inexperienced user.
C. Gatsou, A. Politis, D. Zevgolis

12.00-12.25

Influence of surface free energy of biodegradable films on optical density of ink coated fields of prints.
J. Izdebska, H. Podsiadło, L. Harri

A graphic designer’s view on the interaction design for mobile application development.
K. Vadnjal, A. Praprotnik, B. Petek

12.25-12.50

Permanent flexographic plate changes through nip contacts.
D. Beynon, T. Claypole

Linking physical print and digital media. opportunities and challenges of quick response codes in the face of mobile visual search technology.
N. Gilewicz

12.50-14.25

Lunch

14.25-16.05

Session 4 A - Printed electronics 1                   Wolfgang Faigle

Session 4 B - The consumer perspective                  Anu Seisto

14.25-14.50

Disturbance factors in a one impression gravure printing process for the production of PEM fuel cell electrodes.
F. Siegel, A. Kohl, E. Enns, A. Willert, W. Deger, H. Dziallas,
R. Baumann

Brand experience as a tool for brand communication
in multiple channels.
A. Mensonen, J. Laine, A. Seisto

14.50-15.15

Investigation in the homogeneity of gravure printed polymer films for printed electronics.
S. Stahl

Legibility on Apple iPhone 4S.
B. Rat, K. Možina

15.15-15.40

Photoacoustic characterization of a printed electroluminescent panel.
M. Držková, T. Syrový, N. Peřinka, M. Roch

On the definition of a multi-criteria model for the evaluation and adoption of packaging.
M. Tsigonias, N. Kakizis, G. Romanos, A. Tsigonias,
D. Tsimis, A. Politis, D. Zevgolis

15.40-16.05

The influence of engagement on the flexographic printing of fine lines. 
T. Claypole, G. Davies, S. Hamblyn, D. Galton, R. Hall

The emotional impact of packaging design. An eye tracking analysis.
U. Nikolaus, D. Lipfert

16.05-16.25

Coffee break – sponsored by Aero, d.d.

16.25-17.40

Session 5 A - Packaging                             Diana Gregor Svetec

Session 5 B - Text and images                                Bojan Petek

16.25-16.50

Thermochromic composition on base of cyanine dyes as smart packaging element.
E. Bablyuk, I. Nagornova

Legibility of offset prints after exposure to light.
B. Rat, S. Bračko, K. Možina

16.50-17.15

Wear of packaging during transport simulation.
P. Rättö, T. Trost, E. Blohm

Digitisation of old printed typefaces.
K. Možina, T. Urbanc

17.15-17.40 

Introducing a new anaglyph method: compromise anaglyph.
J. Ahtik

09.00-10.40

Session 6 A -Printed electronics 2                       Gorazd Golob

Session 6 B - Offset and gravure printing           Edgar Dörsam

09.00-09.25

Advantage of customized battery integration as self-sustainingand embedded device within print products.
M. Espig, S. Heinz, A. Stark, F. Siegel, A. Willert, R. Baumann

Developing a laboratory simulation of tail edge pick.
P. Gane, C. Ridgway

09.25-09.50

Printed UHF RFID antenna on coated cardboard.
T. Muck, U. Bogataj, M. Maček, D. Gregor-Svetec, L. Pavlovič,
M. Pivar, M. Đokić, B. Batagelj, Urška Bogataj

Control of the breakup of ink filaments in offset printing.
J. Claypole, D. Deganello, P. Williams

09.50-10.15

Graphene inks for printed electronics.
A. Pekarovicova, V. Husovska, P. Fleming, M. Knox,
H. Fukushima, C. Roberst

Determination of gravure cells using confocal microscopy.
N. Bornemann, T. Guck, T. Bitsch, E. Dörsam

10.15-10.40

Hot stamping technology for functional printing.
A. Lyashenko, L. Salun, E. Dörsam

Hardness and electric conductivity of copper in gravure form production.
A. Weichmann, T. Wolber, M. Galus

10.40-11.00

Coffee break

11.00-12.15

Session 7 A - Productivity                              Anastasios Politis

Session 7 B - Materials                                                  Fons Put

11.00-11.25

Towards a fully digital computer-to-screen workflow for an
improved product quality and quality assurance in screen printing
J. Jesenko, B. Petek

Accelerated light aging of digital prints.
C. Horvath, A. Borbély, R. Szentgyörgyvölgyi

11.25-11.50

Measuring forces appearing while cutting a stack of sheets
with the aim to improve post press processes
J. Neumann, M. Desch, D. Spiehl, E Dörsam

Offset printing quality characteristics of Rich Mineral Paper.
S.-Y. Cheng, Y.-C. Hsieh, C.-C. Kao

11.50-12.15

Leaner and better… How can the setup time and waste at the
sheet-fed presses can be reduced?
C. Horvath

Adhesive strength of surface coatings on digital printed products.
D. Milosavljević, J. Backhaus

12.15-13.30

Lunch

13.30-15.10

Plenary session 8 - Research and researchers for the future                                                                                            André Dion

13.30-13.55

FESPA presentation
When printing meets science.
P. Kiddell

13.55-14.20

Invited lecture - the awarded paper of the 4^th International Printing Future Days, Chemnitz 2011
Photoacoustic measurements of screen-printed conductive layers.
N. Peřinka

14.20-14.45

Keynote presetation
Next Media – a unique cooperation between industry and research.
H. Juhola

14.45-15.10

Keynote presentation
Personal Media Day – studying media user behavior and preferences
K. Markkula

15.10-15.35

Closing of the Conference                                                                                                                            Anne Blayo, Raša Urbas

15.10-15.20

Wrap up
Raša Urbas, conference director and Anne Blayo, president of iarigai

15.20-15.35

40^th International research conference, Chemnitz, September 2013
Presentation by TU Chemnitz

15.45-17.00

General assembly (official representatives of members only)

17.30-18.00

Board meeting (members only)

 (to be followed by the conference dinner (19:30) – participants and partners)

09.45-13.45

Industrial tour

09.45

Start of the tour by buses from Hotel Slon

10.15-11.00

Arrival to Savatech Kranj and presentation of the company

11.00-12.00

Tour of the operation - production of offset rubber blankets

12.00-13.30

Lunch

13.30-13.45

Return to Ljubljana via the Airport